Platinu   Titanju   Anode   Elettrolizzatur   għal   Ilma   Jonizzatur

Platinu Titanju Anode Elettrolizzatur għal Ilma Jonizzatur

Daqs: 220*110*25mm
Tip: Pt miksi titanju anodi

Introduzzjoni tal-Prodott

It- tank korp is magħmul magħmul minn mhux tossiku ABS plastik materjal, u l-intern jista be mgħammar ma rutenium-iridium kisi, platinu-iridium kisi, platinu-iridium kisi, platinu miksi titanju elettrodu u joni membrana importat minn Ġappun, with a pH valur ta ta 8-11.

Alkalin elettrolizzaturi għal ilma Ionizer magni għandhom a stabbli u tajjeb elettroliżi effett , u huma wiesgħa użati in dar ilma elettroliżi magni, diżinfezzjoni magni u kbar ilma pjanti.

Titanju metall elettrodu is a key part of the water electrolysis machine, and the quality of the metal electrode direttament affects the quality quality of the quality of the water purifier. How to choose electrodes should be selected reasonably according the nature of the work. In the field of treatment, metal elettrodi must meet the following basic requirements:

(1) It has good electrical conductivity;

(2) Qawwija korrużjoni reżistenza;

(3) Tajjeb mekkaniku saħħa u ipproċessar prestazzjoni;

(4) Twil xogħol ħajja;

(5) Tajjeb elettrokatalitiku prestazzjoni, eċċ.

Fil il il-qasam ta ilma trattament, speċjalment in il-proċess ta' ilma Ionizer, for example, in the process of generating acid and alkali ion water, there are various strong oxidizing substances in the water, such as: O3, H2O2, HClO, etc., and the anode is spiss reversed. It is necessary to use special functional electrodes. After years of research, our company has development a long-life elettrodu adattat għal il-qasam ta ' ilma trattament-platinu miksi titanju elettrodu. Dan elettrodu huwa miksi bi platinu nobbli metall bi għoli elettrokatalitiku prestazzjoni, qawwi ossidazzjoni reżistenza u tajjeb konduttività fuq a pur titanju sottostrat , li huwa an insolubbli anodu.

Karatteristiċi:

1) Titanium has the characteristics of light specific gravity, good strength, corrosion resistance and good performance, especially the resistance to wet chlorine is unmatched by other metal materials. For example, when there is a small amount of chloride ion in the electrolysis of water, pitting corrosion will occur soon on the stainless occur head on the stainless steel plate, li shortens the electrode life, filwaqt titanium ma not have these problems.

2) Due to the addition of a variety of platinum group noble metals in the coating, it has high current efficiency, good electrical conductivity, good electrocatalytic performance, strong oxidation resistance, long working life and energy saving.

3) L elettrolizzatur għal ilma elettroliżi magna żviluppaturi u prodott by kumpanija has stable electrolysis effect, low energy efficiency, long life and low price, and this product has passed the European Union's EC-1935-2004 test.

Speċifikazzjoni

Prodotti Isem

Dimensjoni

Speċifikazzjonijiet Tekniċi

Unità domestika tat-tip

(Daqs żgħir )

Żgħir elettrolitiku ċellula

220 * 110 * 25mm

Ru-Ir ossidu imħallat titanju anodi

1. It is recommended to add a flow controller for the inlet and outlet water. The electrolyzer is designed to be 120L~150L/h, and the ratio of acid-alkaline water is 1:1.

2. Uża vultaġġ <24V, current: 0.5A-3A (adjust from small to large by itself), the maximum does not exceed 5A.

3. The pH range of the electrolytic cell is 6.0-9.5 (if the PH needs to be higher, the electrolyte needs to be be added to the electrolyte).

220 * 110 * 25mm

Pt miksi titanju anodi

Daqs medju daqs

Medju elettrolitiku ċellula

250 * 150 * 100mm

Ru-Ir ossidu imħallat titanju anodi

1.Use voltage 16-24V, current: 22A-25A (adjust from small to large by itself) PH: 2.7 (add 3~5‰ sodium chloride) corresponding to alkaline PH: 10.5~12.

2.The single water nozzle of the electrolyzer is DN=25 water inlet, the double water nozzle is DN=25} water outlet, the ratio of acid and alkali water is 1:1 (aġġustabbli), and the water inlet is 1 ton/hour.

250 * 150 * 100mm

Daqs kbir


Kbir elettrolitiku ċellula

250*150*150mm

Ru-Ir ossidu imħallat titanju anodi

1. Inlet u żbokk ilma flimkien ma ' fluss kontrollur.

2. Uża vultaġġ <40V, current about 55A (adjust from small to large by itself), PH: 4.5~9.5.

3. The single water nozzle of the electrolyzer is DN=25 water inlet, the double water nozzle is DN=25 water outlet, the ratio of acid and alkali water is 1:1, and the water inlet is 3 tons/h.

Kbir elettrolitiku ċellula

250 * 150 * 150mm

Pt miksi titanju anodi

Utent manwal ta' l-ilma Ionizer:

1. The tank is installat vertikalment, the single water nozzle is the water inlet, and the double water nozzle is the water outlet.

2. When the electrolyzer is activated , the water is fornut first and then the electricity, and when it is closed, the electricity is cut off first and the water is cut off.

3. Il- kwalità ta ' l- ilma ipproċessat minn il elettrolitiku ċellula trid tkun iffiltrata nadif tap ilma jew ippurifikat ilma

4. The water pressure is 0.1~0.4Mpa, and the water outlet must not be closed during use, otherwise the electrolytic cell will be damaged.

5. The two sides of the electrolytic cell are wiring terminals, each of li is connected the positive and negative poles, and the current must be a DC power supply. Adjust the current size supply. Adjust the current size sharing to the PH level required by the use (depending on the water quality, the current size is different, you must start from the small current experiment, and it is recommended to use {1% 7d}.3A kurrent)

6. Il arblu jista ' ikun maqlub biex tnaqqas il-fenomenu ta' skalar ġewwa it-tank .

7. No kolliżjoni, użu at kamra temperatura

It-tags Popolari:

Tista 'Tħobb ukoll

(0/10)

clearall